FAQs Frequently Asked Questions About our Products and Solutions

Submit an enquiry Submit an enquiry

All FAQs (1821 total: showing 581-600)

How many strain gages can be hooked up per excitation channel using a CR1000 and multiple 4WFBS350 modules?
Can more than one strain gage use the same excitation terminal?
What needs to be remembered when trying to excite multiple strain gages from the same excitation channel?
What is necessary for making strain gage measurements with Campbell Scientific data loggers?
What is used to wire an AVW200-series module to the control ports on the CR3000, CR1000, or CR800?
Can a CR3000, CR1000, or CR800 communicate with an AVW200-series module via an RS-232 port?
How fast can the AVW200, AVW206, AVW211, or AVW216 make a measurement?
How many AM16/32B multiplexers can be attached to one AVW200-series module?
What might cause an AVW200-series module to not communicate with a data logger?
In a wireless network, can the radio of an AVW206, AVW211, or AVW216 translate data from other AVW200-series modules?
How many AVW200-series modules can communicate with a CR1000?
Is there a way to request and obtain the voltage and radio signal strength from a remotely located AVW206 using CRBasic?
How strong is the signal of the built-in radio on the AVW206, AVW211, and AVW216?
Is an AVW200-series module required on vibrating wire transducers to limit noise?
Is there a reset button on the AVW200, AVW206, AVW211, or AVW216?
What are the differences between the AVW200, AVW206, AVW211, and the AVW216?
Is a 17394 connected to an SC32B basically the same as an SC-USB?
How do the 17934, the SC32B, the SC929, and the SC-USB compare?
When a CWS655 is put in water, why does the volumetric water content read NAN?
How can it be determined if the NAN values are caused by soil conditions or a faulty CWS655?

Previous Next