FAQs Frequently Asked Questions About our Products and Solutions

Submit an enquiry Submit an enquiry

All FAQs (1821 total: showing 921-940)

Using PC200W, can real-time plots be generated as the data are acquired?
On the interface of the PC200W software, it seems as if the Monitor Data tab displays the real-time data. Which table is used from the data logger for this?
Are there instructions as to how to download, view, and print daily weather records using PC200W?
Can a CSI file be edited using PC200W?
Can a USB-to-RS-232 converter be used so that a laptop running PC200W without an RS-232 port can talk directly to a data logger?
Can PC200W operate on a 64-bit system?
When replacing a retired HMP45C with an HMP60, can the same radiation shield be used?
How often should the relative humidity (RH) sensing element on an HMP60 be replaced?
What is the difference between the CS215 and the HMP60?
What does it mean if the water sampler LCD displays “fault shutdown power failure”?
What does it mean if the water sampler LCD displays “fault shutdown sample abandoned”?
What might cause a row of black squares to appear on the LCD of a water sampler?
Why might a water sampler controller not retain its programs?
Why might a water sampler turn on but fail to collect a sample? How can this be fixed?
What might cause a water sampler pump to not start? How can this be fixed?
What are the major differences between a CH100 and a CH200?
How can a tower and crossarm configuration be made more stable?
Is there a way to only record measurements during the daytime and put a CR200X-series datalogger in sleep mode during the nighttime to conserve power?
If a CR200X-series datalogger has not been used in a while and the internal battery is low, will the battery recharge if the data logger is connected to a power supply? Or does the battery need to be replaced?
Instead of saving the data of a CR200X-series datalogger to one large file, how can it be saved in daily, hourly, or half-hourly files?

Previous Next